DIY Bottom Entry Bug Net Instructions – The Ultimate Hang – GWC Mag

I’ve been wanting to do this project for some time, so I am excited to get this one in the books. Today I’m going to highlight the build steps and techniques of sewing a bug net for a hammock.

This will be a 360-degree bug net that completely surrounds the hammock except for an opening on the bottom that is loosely cinched with some shock cord. Often called a bottom-entry bug net.

This is a straightforward project, for easy-to-moderate skill level if you’re new to DIY projects. No zippers or complex patterns required.

We will use a basic straight stitch for all the hems and the main “complexity” will be a flat-felled seam along the ridgeline, which is actually easier to sew than you think.

You will need a basic sewing machine with nylon thread.

To make things easier, I purchased all the fabric and notions from Ripstop By The Roll. They sell a kit with 7 yards of no-see-um mosquito netting, 4 cord locks, and 15 feet of 3/32 shock cord.

Related posts

Backpacking Trip E-Books – The Big Outside – GWC Mag

‘HomeBase’ for Any Adventure Vehicle – GWC Mag

Deep-Sea Life Bonanza Discovered off Easter Island » Explorersweb – GWC Mag